DSM Series

ACHITECTURAL DIGITAL DIMMER

Dimsense Module
Digital Dimmer DSM Series is a development from The Diligent Digital Dimmer (DD-Series). It’s superior technology allows Digital lighting control and the ability to handle complex and large scale Projects.

DSM Series

Feature

  • Circuit controlled by Microcontroller.
  • Up to 32 program settings.
  • System is protected from excess power or short circuiting by MCB. under IEC/EN 60898 standards.
  • Voltage isolation between the control system and power system is ensured safety by the opto-isolator with AC. voltage tolerance valued at 7,500 volts.
  • RFI. Suppression noise protection system employing the Toroidal choke and the R-C Network. Meet with BS 800,VDE 0875 and CISPR 14 (EN55015), (EN55022), (EN50081) standards.
  • Heat ventilation using heat sink.
  • Solid State Thyristor phase power or relay control system.
  • Light dimming by the Square Law ?B? Dimming Curve.
  • ?E? PROM? data loss protection system (No need for battery back-up).
  • 40?C Maximum ambient temperature for 100% duty cycle.
  • Lamp indicator each channel.
  • Panic override function (By-Pass System).
  • Compatible with Incandescent, Halogen, Halogen low voltage, Fluorescent, LED and other.
  • Can be Programmed by front panel and Hand Held Programmable.
  • Scene recall using by front panel and remote control.
  • Load test with auto fade testing function.
  • Function Monitor : For easy viewing of lighting level of each channel
  • Independent setting for Dim or Non-Dim function.
  • Start Dimming can be set on a per-channel basis (0-100%).
  • Start Non-Dim can be set on a per-channel basis (0-100%).
  • Filament Preheat can be set on a per-channel basis (0-20%).
  • Output Limit can be set on a per-channel (0-100%) basis.
  • Fade time setting for scene change (0-60 Minutes)
  • Master/Slave setting for system control management.
  • Lock key function to prevent operation.
  • Can be patch channel.
  • Start address (DMX-512) Setting.
  • A choice of wall mounted and Cable Tray installations.
  • Compatible with control signal input at DMX-512 and Lunar protocol (RS-485)
  • Compatible with 1-Phase, 2 Wires 200-240 V.AC. 50Hz.
  • CE EMC Standard.